Step Type:

Drag to rearrange

Insert the 2.85mm nylon filament into the hole next to the screw hole.

Use a M3x10mm head cap screw to secure the nylon filament in position.

Route the cables for the fans, the PINDA, the filament sensor cable, and the extruder motor through the hole.

Use 2x M3x16mm head cap screw to...

fasten the carriage's back bottom part to the x-carriage.

Use a M3x40mm head cap screw to...

...fasten the cable holder to the x-carriage.

Your contributions are licensed under the open source Creative Commons license.