Printed Copies Are Uncontrolled
Wiki ID: 40
Author: Caribou3d
Revision ID: 167
Revision Date: 12-18-21
Build manual for CaribouMK3s
00. Safety Instructions
01. Assembly of the xy-Frame
02. Assembly of the y-Axis
03.1. Assembly and Installation of the Heatbed Carriage for MK52-Blocks
03.2. Assembly and Installation of the Heatbed Carriage (for MK52)
04. Installation of the y-Belt
05. Assembly of the z-Axis
06. Assembly of the Einsy Box
07. Assembly of the PSU
08. Installation of the Einsy Box and the PSU
09. Assembly and Installation of the Display
10. Wiring of the Motors and the PSU
11. Installation of the Heatbed
12. Assembly of the x-Axis
13. Installation and Wiring of the x-Axis
14.1. Assembly of the Slice Engineering Hotend
15.1. Assembly of the Bondtech MK3S Mosquito Extruder
16.1 Installation and Wiring of the Bondtech MK3S Mosquito Extruder
17. Installation of the Upper x-Profile
18. Assembly and Installation of the Spoolholder
19. Setup und Calibration
Detailed build instructions for the Caribou MK3s with it’s various configurations.
Past 24 Hours: 0
Past 7 Days: 5
Past 30 Days: 12
All Time: 4,598